Engineering-Tech Wiki

User Tools

Site Tools

You are here: start » auth » setup_printers
Trace:
auth:setup_printers

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
auth:setup_printers [2010/12/21 17:20] – [Add Printer using CUPS via Samba] kohoferauth:setup_printers [2012/12/10 13:36] – [1. PRINTING via SAMBA (using a Windows Print Server)] kohofer
Line 1: Line 1:
-====== Setup Printers ======+====== SETUP PRINTER UNDER LINUX ======
  
-===== Windows ===== 
  
-==== Computer joined to UNIBZ domain ==== 
  
 +===== 1. PRINTING via SAMBA (using a Windows Print Server) =====
  
-  *Step 1 +<note important>Your user must be a member of the admin/sudo group</note>
-  {{printers1.jpg|:printers1.jpg}}+
  
-  *Step 2 +First get the name(s) of the printer(s) you want to use:
-  {{printers2.jpg|:printers2.jpg}}+
  
-  *Step 3 +To get the printer names use smbclient. If the program is not installed do:
-  {{printers3.jpg|:printers3.jpg}}+
  
-  *Step 4 +  * apt-get update; apt-get install smbclient
-  {{printers4.jpg|:printers4.jpg}}+
  
-  *Step 5 +Now execute this line to get a list of the printer names:
-  {{printers5.jpg|:printers5.jpg}}+
  
-  *Step 6 +  * smbclient -L \\<windowsprintserver> -U <unibz-login> -W <domain>
-  {{printers6.jpg|:printers6.jpg}}+
  
-  *Step 7 +e.g.
-  {{printers7.jpg|:printers7.jpg}}+
  
-==== Computer not joined to UNIBZ domain ====+  * smbclient -L \\print.unibz.it -U bgates -W unibz
  
-If your PC has not joined the domain, you will need to connect to ubz02prn +Printer naming scheme: 
-and double click on one of the printers in the list in order to install it.+<code> 
 +UBZ 066 POS 300 
 +|    |   |   |-> Room number
  
-**You will of course need a valid account to connect to the printserver!**+|    |   |->POS Building
  
-To connect to ubz02prn, open Explorer and type \\ubz02prn.unibz.it:+|    |->IP-Adress
  
-{{printers.jpg|:printers.jpg}}+|->UBZ University Site Bolzano 
 +</code>
  
-<note important>For guest users make sure they are in the **guest_print_cs** group! +A list of old and new printer names you can find here: http://www.unibz.it/en/ict/Documents/PrinterList.pdf
-</note>+
  
-===== Linux =====+Now that you know the name of the printer, you can starting adding a printer.
  
-==== KDE Cups Print Server ==== 
  
-Step 1+SMB URI 
 +<file> 
 +smb://<domain>@print.unibz.it/<printername> 
 +</file>
  
-Open a konsole and type the following command: 
  
- kcmshell printmgr+Open your preferred browser and type this address:
  
-The KDE Print Manager Window opens. Now Select ''Add'' from the right menu and choose ''Add Printer/Class ...''+  * localhost:631
  
-{{kde_printmanager.jpg|:kde_printmanager.jpg}}+Follow this guides as shown on the next screen shots
  
-Step 2+^Select Add Printer from Administration Menu ^Chose how to connect to Printer^ 
 +|{{:auth:01_Add-Printer.png?direct&500|Select Add Printer from Administration Menu}}|{{:auth:02_Enter-username-and-password.png?direct&500|Enter your local login and password}}| 
 +^Chose how to connect to Printer ^Enter Connection String SMB URI, enter Domain unibz, YOUR username and password!^ 
 +|{{:auth:03_Windows-Printer-via-SAMBA.png?direct&500|Chose how to connect to Printer}}|{{:auth:04_Connection-String.png?direct&500|Enter Connection String SMB URI, enter Domain unibz, YOUR username and password!}}| 
 +^Enter Name, Description and Location ^Select Make of Printer^ 
 +|{{:auth:05_Name-Description-Location.png?direct&500|Enter Name, Description and Location}}|{{:auth:06_Make.png?direct&500|Select Make of Printer}}| 
 +^Select Driver ^Set initial default Options^ 
 +|{{:auth:07_Model.png?direct&500|Select Driver}}|{{:auth:08_Set-Printer-Options1.png?direct&500|Set initial default Options}}| 
 +^Set Default Options^ 
 +|{{:auth:09_Set-Printer-Options2.png?direct&500|Set Default Options}}|{{:auth:10_Printers.png?direct&500|Printer}}|
  
-Select the settings in the next 6 Windows 
  
-{{add_printer_wizard.jpg|:add_printer_wizard.jpg}}{{add_printer_wizard2.jpg|:add_printer_wizard2.jpg}}+When printing from an Application an Authentication Window will/should pop up.
  
-{{add_printer_wizard3.jpg|:add_printer_wizard3.jpg}}{{add_printer_wizard4.jpg|:add_printer_wizard4.jpg}}+Enter your unibz username and password!
  
-{{add_printer_wizard5.jpg|:add_printer_wizard5.jpg}}{{add_printer_wizard6.jpg|:add_printer_wizard6.jpg}}+{{:auth:Print-Authentication.png?direct&500|Enter username and password}}
  
-Step 3+----
  
-Configure the Printer, see next 6 Windows 
  
-{{configure_printer.jpg|:configure_printer.jpg}}{{configure_printer2-1.jpg|:configure_printer2-1.jpg}} 
  
-{{configure_printer3.jpg|:configure_printer3.jpg}}{{configure_printer4.jpg|:configure_printer4.jpg}}+===== 2. PRINTING via KERBEROS (using a Windows Print Server) =====
  
-{{configure_printer5.jpg|:configure_printer5.jpg}}{{configure_printer6.jpg|:configure_printer6.jpg}}+Follow the steps as described in the link below
  
-==== Add Printer using CUPS via Samba ====+https://www.inf.unibz.it/wiki/tech/documentation/sysadmin/linux/printing_to_windows_print_server?s[]=krbsmb
  
-=== Chip Card Printer ===+==== Cups printer setup and URI format ====
  
-Prerequisite:+Now add a printer using cups (localhost:631)
  
-- member of the admin group +In cups select ''Kerberized Printer'' and the uri format is
  
-Caution:+  krbsmb://DOMAIN/PRINTSERVER/PRINTER_SHARE
  
-This procedure is only recommended for users with their own Notebook/Desktop, +e.g.
-because it is necessary to store the password in clear!+
  
-1. Open your preferred browser and type this address: +  krbsmb://unibz/print.unibz.it/UBZ066POS300
  
-  localhost:631 +Continue by selecting Printer Make, Printer Driver and set the Default Options
- +
-2. Follow this guides as shown on the next screen shots +
- +
-^ Select Add Printer      ^ Fillout the 3 fields with your own values^ +
-| {{:auth:cps0.png|Add Printer}} | {{:auth:cps1.png|Fillout the 3 fields}} | +
- +
-^ Select Windows Printer via Samba ^ Device URI, replace with your username and password ^ +
-| {{:auth:cps2.png|Select Windows Printer via Samba}} | {{:auth:cps3.png|Device URI, replace with your username and password}} | +
- +
-^ Select Manufacture Generic ^ Select Printer Driver Generic Postscript ^ +
-| {{:auth:cps4.png|Select Manufacture Generic}} | {{:auth:cps5.png|Select Printer Driver Generic Postscript}} | +
- +
-^ A window will appear asking for username and password ener yours ^ Set Printer Options ^ +
-| {{:auth:cps6.png|Enter login and password}} | {{:auth:cps7.png|Set Printer Options}} | +
- +
-3. Restart cupsys daemon: +
- +
-  sudo /etc/init.d/cupsys restart+
  
 ---- ----
  
-==== How to connect to a Samba Print Server ==== 
  
-First get the name(s) of the printer(s).+===== 3. PRINTING VIA CUPS (using a Linux Print Server) ======
  
-To get the printer names use a Samba share browser like LinNeighborhood or use +First get the name(s) of the available printer(s):
-smbclient with the following options:+
  
-  smbclient -L \\<windowsprintserver> -U <windowsuser> -W <domain> > printer_list.txt+<code> 
 +http://gutenberg.inf.unibz.it:631/printers 
 +</code>
  
-Using Kerberos (aka kinit) 
  
-  smbclient -L \\<windowsprintserver> -k > printer_list.txt+Open your preferred browser and type this address: 
  
 +  * localhost:631
  
-  * Install: +Follow this guides as shown on the next screen shots
-   +
-  sudo aptitude install linneighborhood+
  
-  * Start: 
  
-  LinNeighborhood+^Select Add Printer ^Enter local username (must be in admin/sudo group) and local password^ 
 +|{{:auth:0_add-new-printer_w-browser.png?direct&500|Select Add Printer}}|{{:auth:1_add-new-printer_w-browser.png?direct&500|Enter local username (must be in admin/sudo group) and local password}}| 
 +^Enter Connection string e.g. http://gutenberg.inf.unibz.it:631/printers/<printername> ^ Name, Description and Location Names^ 
 +|{{:auth:2_add-new-printer_w-browser.png?direct&600|}}|{{:auth:3_add-new-printer_w-browser.png?direct&600|}}| 
 +^Select Make ^Select Driver^ 
 +|{{:auth:4_add-new-printer_w-browser.png?direct&600|}}|{{:auth:5_add-new-printer_w-browser.png?direct&600|}}|
  
-- Press Add:+Last select newly added printer; Click on **Administration**\\ 
 +and select: **Set Default Options**
  
-  * Fill in Samba Print Server, Domain and Print Server IP-Address and press Query to verify entries, if query status: query host ... done, press OK  
  
-{{auth:add-machine.png}}+----
  
-  * Select the Samba Print Server and choose scan as user 
  
-{{auth:linneighborhood.png}} 
  
-  * Fill in domain, username and password and press OK. 
  
-{{auth:scan-as-user.png}} 
  
-Now you should have a list with all printers attached to the Samba Printer Server.+===== 4. CHIPCARD PRINTER (using a Windows Print Server) =====
  
-{{auth:printer-list.png}}+<note important>Your user must be a member of the admin/sudo group</note>
  
-Next you need to create/add to /etc/cups/printers.conf file+SMB URI 
 +<file> 
 +smb://domain\username:password@ubz02cps.unibz.it/CPSPrn01 
 +</file>
  
-Example 
  
-<code> +Open your preferred browser and type this address: 
-<Printer **A103**> +
-Info **HP LaserJet 4050 Series** +
-Location **Library** +
-DeviceURI smb://**username**:**password**@UNIBZ/UBZ02PRN/**printername** +
-State Idle +
-StateTime 1178615467 +
-Accepting Yes +
-Shared Yes +
-JobSheets none none +
-QuotaPeriod 0 +
-PageLimit 0 +
-KLimit 0 +
-OpPolicy default +
-ErrorPolicy retry-job +
-</Printer> +
-</code>+
  
-You have to modify the following parameters:+  * localhost:631
  
-<code> +Follow this guides as shown on the next screen shots
-<Printer A103>: name of the printer +
-Info HP LaserJet 4050 Series: Info about the printer, type etc. +
-Location Library: Where is the printer located +
-DeviceURI smb://username:password@UNIBZ/UBZ02PRN/printername: username, password and Printer Name. +
-</code>+
  
-Example:+^Select Add Printer from Administration Menu ^Chose how to connect to Printer^ 
 +|{{:auth:01-add-printer.png?direct&500|Select Add Printer from Administration Menu}}|{{:auth:02-choose-backend.png?direct&500|Chose how to connect to Printer}}| 
 +^Enter Connection smb URI, Domain, YOUR username and password! ^ Name, Description and Location Names^ 
 +|{{:auth:03-enter-connection-string.png?direct500|Enter Connection smb URI, Domain, YOUR username and password!}}|{{:auth:04-name-printer.png?direct500|Name, Description and Location Names}}| 
 +^Select Make Generic ^Select Printer Driver Generic Postscript^ 
 +|{{:auth:05-choose-make.png?direct500|Select Make Generic}}|{{:auth:06-choose-driver.png?direct500|Select Printer Driver Generic Postscript}}| 
 +^Modify Options^ 
 +|{{:auth:07-set-options.png?direct500|Modify Options}}|
  
-<code> 
-<Printer A103> 
-Info HP LaserJet 4050 Series 
-Location Library 
-DeviceURI smb://bgates:forgotten@UNIBZ/UBZ02PRN/4250_A103 
-</code> 
  
-Last restart the cupsys daemon:+<note important>Check that the cups printer config file printers contains the string:</note>
  
-  sudo /etc/init.d/cupsys restart+  smb://domain\username:password@ubz02cps.unibz.it/CPSPrn01
  
 +In a terminal type:
  
-===== Mac OSX =====+  sudo cat /etc/cups/printers.conf | grep smb:
  
-==== Mac OSX via IPP ====+Restart cups daemon:
  
-Open the preference panel and select "Print & Fax" and press the "+" button+  sudo /etc/init.d/cups restart
  
-{{auth:osx_printer1.png|}}+=== Remove clear password from /etc/cups/printers.conf config file ===
  
-Choose "IP Printer" and then "Internet Printing Protocol" +<note important>Please note: NOT ALL Programs show the prompt to enter DOMAIN\username and password</note>
-In the address field put "gutenberg.inf.unibz.it:631"+
  
 +Open the config file and make the following modifications: 
  
-{{auth:osx_printer2.png|}}+  * sudo vi /etc/cups/printers.conf
  
-and in the "queue" the path according to this table: +Place this line in:  
-^model^location^alias^queue| +<code> 
-|HP4050|1st floor left|admin|/printers/HP_LaserJet_4050| +AuthInfoRequired username,password 
-|HP4350|2st floor left|krdb|/printers/HP_LJ4350| +</code> 
-|HP4100|2st floor right|dis|/printers/HP_LaserJet_4100| +Next search for the the DeviceURI line and substitute it 
-|HP3700|1st floor right|case|/printers/HP_LaserJet_3700| +with this line. 
-|HP5550|1st floor left|admin-color|/printers/HP_Color_LaserJet_5550|+<code> 
 +DeviceURI smb://ubz02cps.unibz.it/CPSPrn01 
 +</code>
  
-and then choose the printer model accordingly, then press "Add" +----
- +
-==== Mac OSX via Samba ==== +
- +
-Mac OS X v10.5 or later+
  
-   1. Choose System Preferences from the Apple menu. 
-   2. Choose Print & Fax from the View menu. 
-   3. Click the + button to add a printer. 
  
-{{auth:osx_printer1.png|Printing Preferences}}+==== Printing of private and confidential Documents ====
  
-   4. Press the Control key while clicking the "Default" icon (or any other icon on the toolbar), +https://www.inf.unibz.it/wiki/auth/printing_of_private_and_confidential_documents
-      then choose Customize Toolbar from the contextual menu that appears. +
-   5. Drag the Advanced (gear) icon to the toolbar. +
-   6. Click Done. +
-   7. Click the Advanced icon that was added to the toolbar. +
-   8. Choose Windows from the Type pop-up menu. +
-    +
-{{auth:osx_printer_samba2.png|Advanced Setup}} +
-    +
-   9. In the URL field, type the printer's address in the following format:+
  
-    smb://UNIBZ\mylogin:mypassword@ubz02prn.unibz.it/Printqueuename 
  
-   10. In the Name field, type the name you would like to use for this printer in Mac OS X. +===== Windows 7 and Mac OSX =====
-   11. Choose the appropriate PPD or printer driver from the "Printer Model" pop-up menu. +
-   12. Click Add.+
  
-To get a list of Print queue names on ubz02prn you can use the terminal and type the following command:+[[http://www.unibz.it/en/ict/ComputerInternet/network/printers/default.html| 
 +Home>To Computer & Internet>Computer - Network>Printers]]
  
-  smbutil view //mylogin@ubz02prn.unibz.it +List of old and new printer names:\\ 
 +http://www.unibz.it/en/ict/Documents/PrinterList.pdf
  
/data/www/wiki.inf.unibz.it/data/pages/auth/setup_printers.txt · Last modified: 2023/04/18 16:23 by kohofer