This is an old revision of the document!
Table of Contents
VPN (Virtual Private Network) at the Free University of Bolzano/Bozen
Infos regarding the usage of VPN
Instructions for Windows 2000, XP, VISTA and 7 - 32bit and 64bit
Instructions for MacOS X 10.4
Instructions for MacOS X 10.6
There is no need to install a Client, simply download and install (doubleclick) the
following file:
Instructions for Linux vpnc Client (recommended)
1. Install vpnc
sudo aptitude install vpnc
2. Create configuration file unibz.conf. Download from here: unibz.conf
sudo vi /etc/vpnc/unibz.conf
####################################### IPSec gateway vpn.unibz.it IPSec ID Unibz IPSec obfuscated secret 06294C134E0BEBDA4B449B56BFD305D35D12DABF4044EDB6794926C2CA6D5AEDFE6342DF190E566EB11215DDC1591D5CB6ABEBEB593693C6D0B2077D78034B6AFEEA3221E77F4 C9858DD711AA8DE58F6 Xauth username <your-windows-login> #######################################
apply this rights:
sudo chmod 600 /etc/vpnc/unibz.conf sudo chown root.root /etc/vpnc/unibz.conf
sudo ls -l /etc/vpnc/unibz.conf -rw------- 1 root root 250 2009-05-02 15:54 /etc/vpnc/unibz.conf
3. Start vpnc
sudo vpnc-connect --domain unibz unibz
This will first ask for your sudo password and then your <unibz-password>
4. Stop vpnc
sudo vpnc-disconnect
Possible errors
If you get the following error: vpnc-connect: no response from target
try adding the line below to your configuration file (unibz.conf)
NAT Traversal Mode cisco-udp
When one attempts to connect to their VPN after installing and configuring vpnc on Ubuntu Oneiric,
the following error occurs:
root@ubuntu:~# vpnc-connect Error: either "to" is duplicate, or "ipid" is a garbage.
It appears that the Ubuntu package vpnc comes with an old version of vpnc-script.
This script is what sets up all the addresses and routes for you. The OpenConnect project
provides an updated / revised release of this script. Download the latest copy from here.
Replace the vpnc-script script that comes with the Ubuntu vpnc package: /etc/vpnc/vpnc-script
Instructions for Linux Cisco AnyConnect Client
Installation
1. Open with your browser (tested with firefox 11.0) the following URL:
2. Enter your Username and password, then press Login
3. A “Warning - Security” Windows opens: This will install the Cisco AnyConnect Client
in /opt/cisco of your Platform.
4. Press Run on the “Warning - Security” Window
5. In order to install Cisco AnyConnect, Admin (sudo) rights are required; a Window opens,
enter your local password.
6. The Cisco AnyConnect is installed and running, you can close the URL.
Launching Cisco AnyConnect GUI
This allows you to connect and disconnect the VPN service.
/opt/cisco/anyconnect/bin/vpnui
Please note the vpnagentd must be running for this
- ps auxww | grep vpn
root 1759 0.0 0.3 17984 7644 ? S 12:58 0:00 /opt/cisco/anyconnect/bin/vpnagentd
Launching Cisco AnyConnect NON-GUI
This allows you to connect and disconnect the VPN service.
- /opt/cisco/anyconnect/bin/vpn
Cisco AnyConnect Secure Mobility Client (version 3.0.5080) . Copyright (c) 2004 - 2011 Cisco Systems, Inc. All Rights Reserved. >> state: Disconnected >> state: Disconnected >> notice: Ready to connect. >> registered with local VPN subsystem. VPN> connect vpn.unibz.it connect vpn.unibz.it >> contacting host (vpn.unibz.it) for login information... >> notice: Contacting vpn.unibz.it. VPN> >> Please enter your username and password. 0) clientless 1) scientificnetwork Group: [clientless] Username: <your-username> Password: >> state: Connecting >> notice: Establishing VPN session... >> notice: Checking for profile updates... >> notice: Checking for product updates... >> notice: Checking for customization updates... >> notice: Performing any required updates... >> state: Connecting >> notice: Establishing VPN session... >> notice: Establishing VPN - Initiating connection... >> notice: Establishing VPN - Examining system... >> notice: Establishing VPN - Activating VPN adapter... >> notice: Establishing VPN - Configuring system... >> notice: Establishing VPN... >> state: Connected >> notice: Connected to vpn.unibz.it. VPN>exit
Uninstalling the AnyConnect Client
The client comes with an uninstallation script
- sudo /opt/cisco/vpn/bin/vpn_uninstall.sh
However it doesn't actually uninstall everything properly, it removes files but leaves behind directories.
You can clean up what it leaves behind by deleting the directory /opt/cisco/ and /opt/.cisco/
- sudo rm -r /opt/cisco /opt/.cisco
Per-user configuration is stored in your home directory in a file called .anyconnect
Shrew Soft VPN Client Instructions for 32 or 64 bit version of Windows 2000, XP, Vista and 7 (recommened)
1. Go to http://www.shrew.net/home and download latest stable release of Shrew Soft VPN Client for Windows: http://www.shrew.net/download/vpn
2. Download unibz profile (need to login with unibz login&password) https://pro.unibz.it/vpn/profiles/unibz/Free%20University%20of%20Bozen-Bolzano.zip
3. Install Shrew Soft VPN Client for Windows
4. Start Shrew Soft VPN Client, unzip unibz profile and Import in VPN client